Call toll free 888-654-3376

Motorola BDA-S1 Broadband Drop Amplifier

BDA-S1 Recently Added!
Purchase Information
ConditionNew
Contact Us
Shipping Estimates
Please enter ZIP code / select Country, and press Calculate for shipping estimates
ZIP
Item Information
NEW IN BOX!!!!
INTRODUCTION
The BDA Broadband Telecommunications Drop
Amplifier is a two-way 1 GHz amplifier designed for
customer premise amplification. These amplifiers
can be used to compensate for long drops and
excessive splitting losses. Each BDA is housed
within a robust aluminum die cast housing and
utilizes Motorola’s P-Series Auto-Seize F-Connector
for maximum reliability.
GALLIUM ARSENIDE TECHNOLOGY
The BDA amplifier uses advanced Gallium Arsenide
technology for improved distortion and noise
performance. This technology provides improved
distortion performance for both CTB and CSO
distortions. Compared to silicon-based amplifiers,
GaAs distortion performance remains linear at
significantly higher output levels.
TWO-WAY CAPABLE
The BDA amplifier has built-in diplex filters for twoway
operation. A passive return path is provided for
return path continuity and enables use of multiple
broadband devices such as set-top terminals and
cable modems. Presently the BDA is available with
an S-split (42/52 MHz) and A-Split (65/85 MHz).
Please note the S-split return frequency for the BDA
differs slightly from the traditional S-split offered in
other Motorola products that traditionally use a 5-40
MHz return path. Please contact your Motorola
Account Representative for specific details.
LOCAL OR REMOTE POWERING
The BDA can be powered locally or remotely via a
UL approved AC to DC power supply. Both 120-
volt and 220-volt power supplies are available. A
power inserter (BDP-100/PI) is available for remote
powering applications. The BDA may be purchased
in combination with a BDP-100/PI and a Power
Supply for easier distribution during installation.
SURGE TOLERANT
The BDA amplifier is designed to meet the 6 kV
IEEE C62.41-1991 Category B-3 Combination Wave
at the input port. It is also designed to meet both 6
kV IEEE C62.41-1991 Category A-3 Ring Wave and
1 kV Combination Wave surge for all output ports,
power supply transformer port, and power inserter
ports. This surge tolerance enhances system
reliability.
INDOOR OR OUTDOOR APPLICATIONS
A weather seal and protective coating are provided so
that the BDA amplifier may be used for indoor or
outdoor applications.
  • 1 GHz Gallium Arsenide Technology
  • 2.5 dB Noise Figure
  • Patented Auto-Seize P-Series F-Connector
  • �One, Two, or Four Port Versions
  • Two-Way Capable
  • Led Power Verification
  • Local or Remote Powering
  • Environmentally Hardened Design
  • 6 kV Surge Resistant
  • Current limited power supply